Bomanite Micro Top
Micro-Top by Bomanite is a unique two part cementitious material that will tenaciously bond to virtually any substrate including concrete, asphalt, wood, metal, and plastic. Micro-Top is a combination of a liquid polymer and a colored powder mixture. The material can be applied with a squeegee or troweled onto the surface at a thickness of approximately 20 mils (less than the thickness of a credit card). A wide range of colors can be applied to create uniformity or blended to create variegation in the finish. In many cases, Micro-Top can eliminate costly abrasive blasting required by other materials, as well as reduce costly forming and coloring in outdoor treatments. Limitless color combinations and graphic designs can be used to transform damaged existing concrete or other materials into cementitious art forms, without affecting surrounding materials and fixtures.
FEATURES AND BENEFITS:
- USE INDOORS OR OUTDOORS
- ADHERES TO ANY STABLE SUBSTRATE
- WIDE RANGE OF AVAILABLE COLORS
- ADHERES TO MOST ADHESIVES AND COATINGS
- DESIGNER COLORS UPON REQUEST
- NO PRIMER REQUIRED
- APPLIED TO VERTICAL AND HORIZONTAL SURFACES
- 6,000 PSI MINIMUM
- NON TOXIC
- COMPLETELY DRIES IN 12 HOURS (70° F/21°C)
- CAN INCORPORATE CHEMICAL STAINS
- HIGH ABRASION RESISTANCE
- EXCEPTIONAL BOND STRENGTH
FEATHERS TO A ZERO EDGE
All Colors: Under normal conditions, 1 gallon (3.8 L) of Micro-Top Liquid when mixed with 2 gallons (7.6 L) of Micro-Top Powder will provide approximately 100 square feet of two coat coverage. Three or more coats may be necessary on spalled, badly damaged or textured surfaces.
Standard Package: Standard package consists of three units – one 5 gallon (18.9 L) container of Micro-Top Liquid and two 5 gallon (18.9 L) moisture-resistant containers of Micro-Top Powder.
Pony Pack: Pony Pack is packaged as one unit – 1 gallon (3.8 L) of Micro-Top Liquid surrounded by 2 gallons (7.6 L) of Micro-Top Powder, all shipped within a 5 gallon (18.9 L) moisture-resistant container.
Sample Kit: Sample Kit is packaged as one unit – 1 quart (0.95 L) of Micro-Top Liquid surrounded by 2 quarts (1.9 L) of Micro-Top Powder, all shipped within a 1 gallon (3.8 L) moisture-resistant container.
25 standard colors – Refer to the Bomanite Color Hardener/Release Agent Color Chart for color selections and names. Custom colors available upon request.
Approximately 18 months. Keep Micro-Top Liquid stored indoors and above freezing temperatures. Micro-Top Powder should also be kept indoors and away from moisture.
Bomanite Aquaseal, Bomanite Hydrocoat, Bomanite Interior Floor Seal
All installations should be professionally maintained on a routine basis to assure the preservation of a high-quality, long-lasting surface. This will vary depending on a number of factors including volume and intensity of traffic, UV exposure, geographical location and weather conditions. The use of a qualified flooring maintenance contractor is recommended, especially in commercial applications. Resealing will be required periodically, depending on the amount of foot traffic. Consult a qualified floor maintenance contractor for specific maintenance procedures.
Certain aggressive stains, such as animal waste, proteins and hydraulic fluids, may produce “shadowing” in the finished flooring. Any of these materials found on the substrate should be cleaned with an appropriate cleaner and then sealed with a water-based epoxy.
Micro-Top will bond tenaciously to foreign materials that are bonded to the substrate, but the ultimate bond strength of Micro-Top is dependent on the bond strength of the foreign material.
Keep out of the reach of children. Contains Portland Cement and free silica. See Material Safety Data Sheet for complete information.
AVAILABLE SALES AIDS:
- Bomanite Color Hardener/Release Agent Color Chart
- Micro-Top Brochure (Bulletin 400)
- Micro-Top Specification Sheet (Bulletin 201)
Contact your local Bomanite licensee to request Micro-Top sales aids to assist you in the design process.
Range: 414 – 466 PSI (ASTM D 4541)
Average: 434 PSI
7-day cure: 6,225 PSI (ASTM C 579)
28-day cure: 6,622 PSI
1000 Cycles, H-22 Calibrade wheels- Average depth of wear: 24 mils/roughly the equivalent to 5,000 PSI concrete (ASTM C 501)
After 31 cycles (5,208 hours), no sign of peeling, chalking, blistering, loss of adhesion, fading or algae growth (ASTM G 43-modified to include freeze thaw cycle)
Smoke and Toxic Fume Emission
Negligible emission (British Standard 6853)
Dry: 65, Wet: 58 (British Pendulum Test)
For a complete guideline specification, contact your local Bomanite licensee
P.O. Box 599, Madera, CA 93639
Phone: (559) 673-2411 | FAX: (559) 673-8246
©Copyright 1998 Bomanite Corporation
Bomanite® is a trademark and servicemark with the U.S. Patent Office and other countries. Micro-TopTM is a trademark of Bomanite Corporation, with formal registration pending. Printed in U.S.A. 10M498